Are you looking for a city bike? A cargo bike? Something to travel with? A mountain bike? A gravel bike? A moped resembling a bike? Don’t really know? Read the descriptions below to decide:

City Bikes

E-bike using a conversion kit from ESOULBIKE
A typical city bike, image credit: Freepik

A city bike will normally have smoother tires and a heavier frame, your posture will be rather upright, they can have a cargo basket in the front and the back. Most people will use it for commuting, shopping or errands around the city, but you can do road trips too, as long as it is mostly on paved roads and the road is not extremely steep. It’s a wonderful replacement for a scooter and can even replace your car, if you live in a city and your winters are not too harsh. This kind of e-bike works best with a small (250W) front hub motor and a small to medium size battery (~300Wh). You should probably buy a ready-made one, there is not much advantage to DIY here and they are the cheapest kind of e-bikes sold.

Cargo Bikes

A cargo bike with large front storage
Cargo bikes are really practical, image credit: Riese & Müller

A cargo bike is much like a city bike, but will have an even heavier frame and more storage space. Many even have a trailer or dedicated storage units. If you live in a large European city to the north of say, Adriatic, you probably see them every day. People use them for work (transport and deliveries for small businesses) and shopping. Like city bikes, there are many ready-made options here, but there is more space for DIY, since the needs are more diverse: Do you need a stronger motor for your heavy load? Do you drive a lot each day and need to make the battery larger? Would you like to convert your city bike to a cargo bike? Do you already have a cargo bike, but just want to electrify it?

Depending on your needs you could with a hub motor or a mid-motor setup. A (bigger) hub motor should still be enough for the lighter cargo bikes, as long as there are no very steep hills to climb. If this is not the case, a mid-motor setup is a must. You will need a bigger battery: Take the weight of a fully laden bike with you on it in kilograms (e.g. 200 kg) and multiply by 3-5 to get an estimate of what you need in Watt-hours. A somewhat oversized battery on a cargo bike is less of an issue weight-wise than on other types of bikes.

Mountain Bikes

Male Cyclist Riding Mountain Bike On a Sunny Day
You can go anywhere with a mountain bike, 😎 image credit: Freepik

A mountain bike should be familiar to you already. The posture is intermediate and the tires are usually thicker with more profile for a better grip on gravel and mud. Almost all have front suspension and some have rear suspension too. Mountain bikes with front suspension are a good candidate to DIY-electrify, but beware the rear suspension: it is likely it will be hard to work around the linkages and there is less space for the motor/battery. It’s probably best to buy a ready made fully-suspended e-bike instead, but it can be expensive. It makes sense to pick a slightly larger frame size for an e-bike conversion, but if you like your existing bike, just go for it.

A mid-motor setup is a must with mountain bikes, the hub motors simply do not work well on very steep climbs. When I look at people electrifying mountain bikes, I see a clear tendency to oversize the motors and batteries. People will install 1kW or larger motors and huge 72V batteries, but this is not a bike anymore—we will discuss mopeds later. Instead, think about your physical fitness and size:

  • A thin and fit person will hardly need the motor in any case, except for steep climbs. A 250W or 350W mid motor is more than enough for them, along with a small 350Wh battery. The reward for not over-sizing is a lighter bike and a much cheaper conversion.
  • Most people (medium height/build, not totally sedentary) should choose a 350W or 500W motor with ~500Wh battery.
  • Bigger people (tall and/or overweight, sedentary) will need a 500W or 750W motor. Choose the battery size by taking the combined weight of the fully laden bike (saddlebags and all) and the rider in kilograms (e.g. 150-170kg), and multiply by 4-5 to get the battery size in Wh. This should last you the whole day.

Gravel Bikes

Man Riding a Gravel Bike
Image credit: Future

A gravel bike is a bit of a cross between a mountain and a road bike, with no suspension, but a sturdier build. The posture is usually quite low. Most of my comments about mountain bikes apply, but these bikes are normally chosen by fitter people and you will likely want to keep the motor and battery size on the lower end of the ranges I mention there.

E-mopeds

A big DIY e-bike with two large hub motors and an oversized battery
A big very DIY 3kW e-bike with two large hub motors and an oversized battery, image credit: DIY Electric Car Forums

An e-moped is an e-bike with a massively oversized motor and battery. Several kilowatts of motors and thousands of watt-hours of batteries are not uncommon—all bets are off here. To me, these are simply electric motorbikes and out of scope here. But they do have (mostly unused) pedals, obviously make for a fascinating hobby, and seem to have a lively community of people building them.

What If You Just Want To Build Something?

A typical mid-drive e-bike conversion kit
A typical Bafang-style mid-drive e-bike conversion kit, this one is from Dillenger

What if you have no clue about what to build, but still want a DIY e-bike? The answer is simple: Get a second-hand mountain bike and buy a decent mid-drive kit in line with my recommendations for a mountain bike. It will be a cool thing to build, quite useful for anything from commuting to bike trips to errands, but it should not break the bank. After you ride it for a while, you will know what you want/need, and if you need a different bike, you will be able to recoup most of the costs by selling what you made.